CBN Grinding Disc For Spring Grinding is used for compression springs surface grinding on double disc spring grinders. More Superhard used CBN disc can be stripped and re-electroplated with new grit, if the steel body is not damaged.
CBN grinding wheel is used for compression springs surface grinding on double disc spring grinders.
Spring steels, stainless steel and titanium alloy.
Moyer,OMD, Wafios, Dorn, Herckelbout, Hack, Bamatec, Kamatech and Bennet Mahler,etc.
* Great on light diameter wire < 2 mm
* Higher production rates, Longer wheel life and Single layer super abrasive grain improves tolerance
* Dressing is not necessary,Produce less heat when grinding
* Compared with conventional wheels, the CBN wheels are only worn to about one hundredth, The spring load and free length have been constanted. Therefor it greatly saves the inspection time
* More SuperHard used CBN disc can be stripped and re-electroplated with new grit, if the steel body is not damaged
|Model||D (inch)||H (inch)||T (mm)|
|* other specifications can be made according to customers requirement. Typical wires ground range from 0.020 inch to 0.062 inch diameter|