Industry News

Custody and storage of various centerless grinding wheels.

2023-03-18
As the use of various centerless grinding wheel has high requirements for safety and performance, special attention should be paid to the following points in the storage and storage of various centerless grinding wheels:

1. The external environment should be kept dry, ventilated, and the temperature change is small, the room temperature should not be less than 5 degrees. Ceramic bonded various centerless grinding wheel should not be placed in wet or frozen areas, resin bonded various centerless grinding wheels should not be in contact with acid and alkali, and neither of these various centerless grinding wheels, nor rubber bonded various centerless grinding wheels should be in contact with oils.

2. Can not be stacked arbitrarily, should be stored in accordance with the specifications of the appropriate bracket, cabinets above, at the same time to avoid vibration, and mark the specifications of the grinding wheel and other detailed parameters, the root according to its shape, material, size, granularity orderly storage, so as to avoid confusion.

3. The stacking height of resin and rubber various centerless grinding wheel shall not exceed 200mm, and flat iron plates shall be placed on the bottom and top of the various centerless grinding wheels to prevent breakage and deformation of the various centerless grinding wheels.

4. Thin slices of various centerless grinding wheel with sharp edges should be stacked together and separated by padding (soft material such as heavy cardboard or foam that can maintain a certain strength) at intervals between each grinding wheel.

5. Because various centerless grinding wheel with magnesite (magnesite) binder can absorb moisture in the air, special attention should be paid to the storage of such various centerless grinding wheels to prevent heat and erosion.

6. Rubber binder, diamond binder and resin binder should not be placed for too long, otherwise aging problems will occur due to the change of chemical composition. The storage period of rubber and resin binder is generally not more than one year.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept